Article including Kerosene Lamp Straight Large (article number 121810) and Hanging Stand in black (article number 713207).
Kerosene lamp in clear glass with an etched pattern and brass coloured burner and stand in white lacquered metal with a small shade and coloured brass details. The kerosene lamp can easily be separated from the stand when refilling with lamp oil. We recommend Strömshaga's lamp oil (article number 100001), sold separately. One wick included, match with wick article number 116210.
INSTRUCTIONS FOR USE:
Fill the lamp with lamp oil and light the lamp:
The kerosene lamp must be switched off and cold when filling.
- Remove the burner glass and unscrew the burner. - Fill the lamp with lamp oil, circa 2/3. Use a funnel for minor spills. - Put the burner with wick back and let the wick absorb lamp oil for approx 20-30 minutes. - Light the lamp and adjust the height of the flame with the screw on the side of the burner. - Put back the burner glass.
Please do note that you may have to adjust the burner glass in order to get it straight. When the glass is straight, use the metal clamps on the burner to stabilize it.
To turn off the light: Extinguish the flame by slowly lowering the wick until the flame goes out or blow out the flame.
Shift wick: The old wick is pulled out from the burner from below and the new one is inserted from below and screwed up to the correct height.
Important: The burner glass will be extremely hot when the lamp has been burning for some time. Place the lamp on a flat surface away from flamable material. Make sure to also keep the area above the lamp, about 1 meter, free.
Consider the lamp as a primary light source and not only as decoration. Never leave the lamp unattended and keep it out of reach of children and pets. The lamp oil is very toxic to ingest. If swallowed DO NOT induce vomiting but contact poison control centre for guidance.
(Please read the inclosed directions for use before using the lamp)